G3N-ID

G3N-ID

Braking force F :
G3N-ID 11200 N
Minimum release pressure :
50 bar G3N-ID
Max pressure :
100 bar
The torque values specified are obtained with :
n. 8 springs for 3N-ID
Torque proportionally less are achievable with :
n. 6-4-2 springs for 3N-ID
The diagram shows the torque variation for each millimeter of linings wear :
The diagram shows the torque variation for each millimeter of linings wear
Adjust according to ensure the correct torque value is achieved :
Adjust according to ensure the correct torque value is achieved
Hydraulic fluid :
Mineral oil based SAE/ISO 46
Total oil displacement for 2 mm movement of each pad :
0.017 dm3
Dynamic torque :
= F • (disc radius in m - 0.062) = Nm
Max total wear :
10 mm
Thickness of new lining :
8 mm
Continuous thermal capacity Qc :
14 kW

The COREMO G3N-ID spring-applied hydraulic caliper brake is operated by helical springs which generate a constant clamping force. The hydraulic operating system releases the brake by compressing the springs inside the thruster.
The brake may be used as a safety brake or as a holding and parking brake.

The Coremo Ocmea service is completed by reporting which includes calculations, FEM analyses and technical reports (all in English) supplied to the customer to complete the technical documentation of the machine on which the brakes are to be installed. This enables customers to make comments on the design variables and allows the Technical Department to adjust the design to provide the most suitable solution.